Service Professional Employment Agreement — Sign-Off

For current Service Professionals. Read the full Agreement below, initial each key section, and sign. A signed copy goes into your personnel file, and the office countersigns it. New hires sign this inside their onboarding packet instead.

Please print your full legal name.

That email doesn't look right — check it or leave it blank.

Service Professional Employment Agreement

This Employment Agreement is made and entered into, effective __EFFECTIVE_DATE__, by and between TimIng Services LLC, dba Mr. Handyman (hereinafter referred to as “Employer”) and __EMPLOYEE_NAME__ (hereinafter referred to as "Employee"). It is intended to replace and supersede any prior employment agreement between the Employer and the Employee.

The Employer hereby employs the Employee, and the Employee hereby accepts such employment within the Employer's territory described as portions of South Charlotte, Matthews,Waxhaw in North Carolina and Rock Hill, Fort Mill and Lancaster in South Carolina (hereinafter referred to as the "Territory").

The Employee shall devote full time and best efforts to employment with the Employer. The Employee shall perform all reasonable duties as may be designated or assigned by the Employer from time to time, and shall observe and follow all rules, policies, standards, customs, and practices of the Employer as they currently exist and as they may be amended by the Employer from time to time. The policies and standards that the Employee shall follow include, without limitation, the methods described in the Mr. Handyman Employee Handbook, the Mr. Handyman Safety Manual, Mr. Handyman Training Video’s, and other similar publications. If, at any time, clarification is needed the management of Mr. Handyman should be promptly consulted.

Employee compensation will be calculated under the Commission Compensation Plan described below, subject to the Weekly Minimum that follows. The Employer shall pay the Employee, and the Employee shall accept from the Employer in full payment for the Employee's services hereunder, the compensation calculated under that plan.

Commission Compensation Plan - A percentage of the Employee's gross Labor and Service Charge revenue. The percentage is set by the Employee's total weekly revenue, as established in the following table.

Employee’s assigned jobs Total Weekly Revenue

$         8,000$       7,120$   1,424$ 30,83024.0%$1,708.8$88,857.6
$         7,000$       6,230$   1,246$ 26,97624.0%$1,495.2$77,750.4
$         6,000$       5,340$   1,068$ 23,12223.0%$1,228.2$63,866.4
$         5,000$       4,450$       890$ 19,26922.0%$979.0$50,908.0
$         4,999$       4,449$       890$ 19,26519.0%$845.31$43,956.12
$         3,999$       3,559$       712$ 15,41118.0%$640.62$33,312.24

Time Records - Employees must disclose all hours worked for each job, and voluntarily working a job on your personal time is not permitted.

You will be paid under the Commission Compensation Plan, subject to the Weekly Minimum below. Additional incentive plans may be introduced for short durations (seasonal) or long durations as market conditions dictate. The employer reserves the right to change these plans when needed or retire them.

Note: The amounts in the second column of the table are estimates of Labor and Service Charge revenue, shown for illustration. The Employee's actual commission is calculated on the Employee's actual gross Labor and Service Charge revenue for the week; the commission percentage is determined by the total weekly revenue tier in the table.

Weekly Minimum: During the first two (2) months of employment, the Employee is guaranteed $1,000 per week. Thereafter, the Employee will be paid the greater of (a) the Employee's commission earnings for the week or (b) $1,000 for that week. Any amount paid after the first two (2) months to bring the Employee up to the $1,000 weekly minimum is an advance (a draw) against future commission earnings. A draw balance will be recovered only from future weeks in which the Employee's commission earnings exceed $1,000, and only from the amount above $1,000, so the Employee's pay for a week will not be reduced below $1,000 to repay a draw.

Tenure Step: After twelve (12) months of continuous employment, each commission percentage in the table above increases by one percentage point (1%), up to a maximum commission rate of 25%.

Same-Tech Warranty Minimum: When the Employee redoes warranty or callback work on a job the Employee originally performed, the Employee will be paid a minimum of $15 per hour for all time spent on that warranty job. If the commission attributable to that work is less than $15 multiplied by the hours the Employee worked on the job, the Employer will pay the difference as a top-up. Warranty or callback work the Employee performs on another technician’s job will be paid as ordinary commissionable work under the Commission Compensation Plan.

Paid Time Off and Holidays: The Employee receives five (5) paid holidays per year, five (5) PTO days after ninety (90) days of employment, and ten (10) PTO days after one (1) year of employment. Paid holidays and PTO days are paid at $25 per hour.

The employee’s compensation may be increased at the Employer’s discretion. All increases are based on merit. Some factors considered include the employee’s attendance, attitude, job performance, maintenance of vehicle, maintenance of equipment and supplies and maintenance of uniform. Any issues that impact your ability to follow the practices of Mr. Handyman should be reported to management immediately for resolution.

The Employee shall be paid bi-weekly on Fridays for services performed during the previous, not current, two weeks.

The Employer may from time to time, at its sole discretion and with no obligation to continue, offer bonuses for various aspects of Employee performance, such as high-quality work or regular attendance. These bonuses will normally be paid after the end of the period in which they are earned. If Employee’s employment is terminated for any reason prior to payment of such bonuses then employee’s right to such bonuses is forfeited.

The Employer shall deduct and withhold from all compensation paid to the Employee such amounts as may be required by law, including, without limitation, social security taxes, federal, state, and local income taxes, and state disability insurance.

As part of the Employee's responsibilities under this Agreement, the Employee shall, without limitation, wear uniforms provided by the Employer.

The Employee also understands and agrees that the Employee shall, to the maximum extent permitted by law, be legally responsible and liable for any loss or damage to the property of the Employer or any Mr. Handyman customers that is caused by the actions, including, by way of illustration only, the Employee's gross negligence or willful act.

The employee is not authorized, for any reason, to operate the Mr. Handyman vehicle in activities not related to assigned duties without first obtaining written authorization from an officer of the company. Any accidents or claims arising out of personal use of the van, approved or unapproved, are not covered under the Employers automobile insurance coverage and will be the responsibility of the Employee. Employee authorizes Employer to deduct charges incurred for reimbursement of costs to repair the van, and all costs associated with any claims arising from personal use of the van, from the Employee’s wages.

The Employer shall provide the Employee with a uniform, work van, van supplies, tablet, and marketing materials. The Employee must return all uniforms, equipment, and unused supplies directly to the Employer immediately upon termination of this Agreement by either party. The Employee authorizes the Employer to deduct from the final paycheck the cost of any uniform, equipment or supplies not returned in good condition. In addition, the Employee authorizes the Employer to deduct charges incurred for any unauthorized tablet use and unauthorized or undocumented company credit card use from the Employee’s wages.

This Agreement and the employment relationship can be terminated at the will of either party at any time with or without cause or advance notice. However, the Employee agrees that if less than seven (7) days notice is given by the Employee to the Employer before terminating this agreement, the Employee’s compensation for the last pay period shall be reduced to the number of hours actually worked multiplied by the minimum wage rate in effect at that time. Employee and Employer agree that this does not alter the at-will nature of the employment relationship, and the Employer retains the right to terminate this agreement at any time without notice if the Employee is in violation of any provisions of this Agreement, or any rules, policies, standards, customs, or practices of the Employer, or if the Employer at its sole discretion is not satisfied with the performance of the Employee.

The Employee’s failure to appear for work for 3 days, without communication or having previously received approval for time off, will be considered job abandonment and cause for termination.

This Agreement may be terminated immediately by the Employer if the Employee is found to be eating, drinking, smoking, or using the appliances in a customer’s house or if in violation of provisions of employee conduct as described in the employee handbook.

The Employee acknowledges and agrees that the names and addresses of Mr. Handyman customers constitute trade secrets or other confidential information. The Employee further acknowledges that Mr. Handyman developed its customers through the use of its own marketing techniques and that those persons interested in the type of services and products offered by Mr. Handyman would not, without similar expense and effort, be known to the public. Accordingly, the Employee agrees that any sale, exploitation or unauthorized use or disclosure of any Mr. Handyman trade secrets obtained by the Employee during or in connection with the Employee's employment with Employer constitutes unfair competition. The Employee promises and agrees not to engage in any unfair competition with the Employer and agrees to be subject to injunctive relief and liable for damages should the Employee at any time engage in unfair competition.

The Employee shall maintain the confidentiality of the Mr. Handyman customer list and the names and addresses of Mr. Handyman customers. The Employee agrees not to solicit any customers of Mr. Handyman (or accept solicitations for side work initiated by the customer) or use any customer information, whatsoever, for any purpose, at any time while an employee of Mr. Handyman.

Because of the difficulty of computing damages incurred by the Employer both Employee and Employer hereby agree that Employee shall pay Employer or the affected Mr. Handyman franchise owner the sum of five hundred dollars ($500.00) for each incidence in which it shall be demonstrated that the Employee has engaged in unfair competition, has not maintained the confidentiality of the Mr. Handyman customer list, has solicited customers or former customers, or has competed directly or indirectly with the Employer in a similar business in the “Territory”. This shall be in force during the entire term of this agreement as a employee of the company.

As part of the Employee's additional responsibilities as a Service Professional under this Agreement, the Employee shall, without limitation: (a) at the frequency specified by the Employer, personally deliver and remit to the Employer all checks, cash, and payments received from Mr. Handyman customers; (b) maintain a current, valid South Carolina driver's license and active personal vehicle insurance; (c) maintain a ticket-free and accident-free driving record both on and off the job; (d) drive only the assigned Employer-provided vehicle in good and clean condition (i.e. Daily ensure the vehicle is clear of garbage at the end of every shift, Weekly Deep Clean: A more thorough cleaning: window cleaning, tire dressing, and interior detailing), in good repair (i.e. Vehicle Inspection: Regular checks for maintenance issues: cleaning headlights, brake lights, and turn signals, and ensuring proper tire pressure), and with such markings as the Employer may designate; (e) wash the Mr. Handyman uniforms provided to the Employee and keep them in good appearance; (f) train, coach, supervise, and encourage other team members.

In the event that the Employee is going to be absent from the job for any reason, whether it be a pre-arranged or unexpected absence, the Employee is responsible for returning the Mr. Handyman vehicle, equipment, supplies, keys, etc. to the Employer. These items must be returned early enough to avoid any interruption to the customers and other employees of Mr. Handyman. All correspondence related to employment should be addressed to or personally delivered to Mr. Handyman, 608 Matthews Mint Hill Road, Suite F, Matthews, NC 28105

IN WITNESS WHERE OF, the Employer and the Employee acknowledge that they have read this Agreement, fully understand it, and have voluntarily executed it at Mr. Handyman, 608 Matthews Mint Hill Road, Suite F, Matthews, NC 28105 on the date or dates listed below.

The Van, Credit Card, and Tablet addenda are signed separately, when your van, cards, and iPad are issued to you.

Please initial this section.

Please initial this section.

Please initial this section.

Please initial this section.

Typing your full legal name is your signature for this Agreement.

Please type your full legal name to sign.

Please confirm the date.

← Back to Technicians